Yamaha SB168-ES Stagebox

3x Yamaha SB168-ES Stagebox With 16 amp power distro and 4way amp

Plug In & Play Dante Stagebox Solution: The Tio1608-D is a Dante-equipped I/O rack with 16 microphone/ line inputs and 8 line outputs. Tio racks feature the same recallable D-PRE™ microphone preamplifiers as the TF series delivering extraordinarily natural and musical sound. In combination with TF series consoles, Tio racks can be connected using up to three units with a fast and easy setup. * Optional NY64-D Card is required. Flexible system expansion via Dante Dante Network Audio Protocol has been adopted, not only in TF, but also in other Yamaha digital mixing consoles such as CL/QL. Combining these I/O racks and the various consoles can significantly increase the flexibility of system designs. Patching can be enabled via “Dante Controller” while Remote HA can be controlled by “R Remote” software. Audio patching and Remote HA can be controlled not only from TF but also from CL/QL. * Please note that Remote HA of the Tio1608-D can be implemented only via the Primary port. Remote HA control of Tio1608D is not available on the secondary network, even when you are using with TF or CL/QL. Sampling frequency rateExternalSignal delayTotal harmonic distortionFrequency responseDynamic rangeHum & noise levelEquivalent input noiseResidual output noiseCrosstalkHeat dissipationPower requirementsPower consumptionDimensionsWHDNet weightAccessoriesOthers Tio1608-D General specifications Sampling frequency rate External 44.1kHz or 48kHz Signal delay Less than 3ms INPUT to OUTPUT, connect with TF5 and NY64-D using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz Total harmonic distortion Less than 0.1% +4dBu@20Hz-20kHz into 600Ω, Gain=+66dB / Less than 0.05% +4dBU@20Hz-20kHz into 600Ω, Gain=-6dB, INPUT to OUTPUT, Fs=44.1kHz, 48kHz *Measured with a -18dB/octave filter @80kHz Frequency response +0.5, -1.5dB 20Hz-20kHz, refer to the nominal output level @1kHz, INPUT to OUTPUT, Fs=44.1kHz or 48kHz Dynamic range 108 dB, INPUT to OUTPUT, Gain=-6dB / 112 dB, DA Converter Hum & noise level Equivalent input noise -128dBu, Gain=+66dB *Measured with A-weighting filter Residual output noise -88dBu, ST master off *Measured with A-weighting filter Crosstalk -100dB, adjacent INPUT/OUTPUT channels, Input Gain = -6dB *Measured with a -30dB/octave filter @22kHz Heat dissipation 100-240V, 50/60Hz, 43.5kcal/h Power requirements 100-240V, 50/60Hz Power consumption 50W Dimensions W 480mm (18-7/8") H 88mm (3-4/8") D 364mm (14-3/8") Net weight 5.7kg (12.6lbs) Accessories Owner’s Manual, Power Cord(2.5m), Rubber stoppers(4) Others Temperature Range: Operating temperature range: 0 - 40℃, Storage temperature range: -20 - 60℃ https://europe.yamaha.com/en/products/proaudio/interfaces/tio1608-d/specs.html#product-tabs

This high-capacity, high-performance I/O rack is compatible with Yamaha CL and QL series consoles as well as the RIVAGE PM series. It features 32 analog inputs, 16 analog outputs, and eight digital AES/EBU outputs. The Rio3224-D2 connects directly to Dante digital audio networks, allowing flexible system configuration. Dual power supply units are built in for high reliability, and a character/graphic display offers easy visual confirmation. 32 analog inputs and 16 outputs, and 8 digital outputs. Redundant connections are supported with primary and secondary connectors. Daisy chain connections are also supported. Comprehensive display and local control of gain and other parameters. Dual power supply units are built in for high reliability. Power consumption: 120W Dimensions (WxHxD): 480 x 220 x 368mm (18.9" x 8.7" x 14.5") Net Weight: 13.5 kg (29.8 lbs)

.5m Hanging Bar Note: No Bolts on sides

100m Cat5 Reel

10 Meter XLR