RCF LW2406 P-Series
Description
More RCF products The L2406-T is a full range high intelligibility compact 3 way column speaker array with vertical controlled directivity for medium to large size installations. It is equipped with six 5" woofers and four 1" dome tweeters mounted in front of the two central woofers. This particular design permits coherent sound dispersion minimizing lobing in a very compact enclosure. The two central woofers are controlled differently from the other four because of the tweeters in front of them, in order to improve the directivity providing a true cardioid column operation.The wide coverage horizontal angle and the controlled vertical dispersion allow correct sound reproduction serving a wide area and assistance in limiting feedback and reverberated sound. A speech filter can be activated for enhancing the voice frequencies and improving speech intelligibility. The crossover is designed to avoid secondary lobing creation. Mounting accessories are provided and are designed to keep the column as close as possible to the wall and simplify the installation allowing suitable tilting. The L2406-T can be used connected to a low impedance amplifier to handle 200W RMS power. It also includes a 60W line transformer for 100V systems. The crossover is equipped with a circuit to protect the four 1" dome tweeters. Features: High efficiency Six 5" woofers and four 1" dome tweeters Controlled dispersion Speech enhancer filter LICC (Low Impedance Compensated Crossover) Tweeters protection circuit Built-in wall mounting accessories to 200W at 8Ω; 60W line transformer included Specifications: Acoustic Frequency Response (-10dB): 100Hz - 20000Hz Max SPL @ 1m: 126dB Horizontal coverage angle: 150° Vertical coverage angle: 30° Directivity index Q: 9 System Sensitivity: 97dB Power section Nominal Impedance (ohm): 8Ω Power Handling: 200W RMS Peak Power Handling: 800W PEAK Recommended Amplifier: 400W Protections: Dynamic active mosfet Crossover Frequencies: 2000Hz Transducers Dome Tweeter: 4 x 1.0'', 1.0'' v.c Nominal Impedance (ohm): 8Ω Input Power Rating: 10W AES, 20W PEAK Sensitivity: 90dB, 1W @ 1m Woofer: 6 x 5.0'', 1.0'' v.c Nominal Impedance (ohm): 8Ω Input Power Rating: 30W AES, 60W PEAK Sensitivity: 90dB, 1W @ 1m Input/Output section Input connectors: Euroblock Constant Voltage Transformer: 100V Power selection 1 (100V): 60W - 167Ω Power selection 2 (100V): 30W - 333Ω Power selection 3 (100V): 15W - 667Ω Power selection 4 (100V): 10W - 1000Ω Standard compliance CE marking: Yes
Similar Products
5.25" background speaker. https://www.peats.ie/product-detail/952715
The black Panaray 402 Series II Loudspeaker from Bose is a full-range loudspeaker designed for either permanent installations or portable sound reinforcement. It is suitable for installation in both indoor and outdoor applications. Its Articulated Array design provides a wide 120 x 60° pattern to effectively cover many smaller venues with a single loudspeaker. Frequency Response (±3 dB): 90 Hz to 17 kHz Frequency Range (-10 dB): 70 Hz to 20 kHz Dispersion Nominal: 120 x 60° (H x V) Overload Protection 2 x lamp Power Handling Long Term: 120 W (480 W peak) Sensitivity (1 W (2.83 V), pink noise input at 3.3' (1.0 m): 89 dB SPL (90 Hz to 17 kHz), 99 dB SPL (300 Hz to 3 kHz) Maximum SPL 115 dB SPL (121 dB SPL peak) at 3.3' (1.0 m) Nominal Impedance 8 Ω
The Alto MS12MA - 12'' 2-Way Bi-Amp Active 350w Monitor The Alto MS12MA is an active stage monitor designed for the demands of the road. The Alto Active Modeling system on the MS12MA active monitor speaker gives you a wide range of equalization settings which allows you to accommodate a wide variety of applications. Alto MS12MA Digital Active Monitor Specs: 350W 12" Digitally Powered Stage Monitor with DSP. Active System Type: 2-way Bi-Amp. with MODELLER Low Output Power: 350W (EIAJ) High Output Power: 65W (EIAJ) Max SPL 1mt: 121dB SPL calculated EIAJ Frequency Response: MODELLER presets setting Protection Low - High: Analog Limiter Low Frequency Device: 12" Coax / 2" voice coil High Frequency Device: 1" Neodymium Driver / 1" voice coil Coverage H° x V° : 70° H x 70° V Spherical Horn Input Sensitivity: Line + 4dB Input Impedance: 30kΩ Balanced / 15kΩ Unbalanced Connectors: Input with Combo / Link with XLR Cabinet: Trapezoidal Shape / Multi - layer Plywood / Handle / Black Paint finishing External Control: MODELLER with 16 Preset / Line Volume / Clipping LED indicator / Ground Switch Dimensions (H×W×D): 313 x 393 x 513mm(12.3"×15.5"×20.2")
You May Also Be Interested In
.5m Hanging Bar Note: No Bolts on sides
100m Cat5 Reel
10 Meter XLR