Kam Stratosphere Ghost White LED Revolving Mirrorball Lighting Effect

Kam Stratosphere Ghost White LED Revolving Mirrorball Lighting Effect

Lighting
Description

DETAILS Description The Kam Stratosphere Ghost is a multi-beam, high-powered colour LED lighting ball, its modern design is a great take on the classic disco mirror ball. This sleek, modern mirror ball produces multiple sharp and intense beams of red, green, blue, white, amber and ultraviolet light. Featuring a really simple, and easy to use 4-button control panel with a range of built-in programs, this disco mirror ball lighting effect gives you total control over the lighting effect's speed, colours, strobing, dimming and direction. With 96 lenses and 5 x 18watt full-colour 6-in-1 LEDs, this Stratosphere mirror ball light effect can fill a dance floor with great lighting effects including rotation, producing a rich lighting effect with multicolour light beams. This White coloured Ghost Stratosphere is perfect for wedding disco lighting, or to add a little more interest to your disco lighting rig set-up. The Ghost Strotosphere can be run on auto, sound-to-light, Master/Slave and DMX modes, allowing for a range of lighting effect combinations including multiple Stratospheres for when one mirror ball lighting effect is not enough. Specifications Suitable for disco, club, bar, party and DJ moving show. Built-in master-slave, sound control and show mode. LED's: 5 x 18W RGBWA+UV 6in1 LED's 96 lenses Display: LED display with manual control buttons Channels: 3CH and 11CH 4 Operation Mode: Sound test, Auto run, DMX and Master/slave Voltage: AC100-240V , 50/60Hz Power Consumption: P= 65W Dimensions: 300 x 300 x 380 mm Weight: 4.1Kg

Tags
KAMLightLED

Similar Products

4 way digital dimmer

The DP4 4 channel DMX dimmer pack has 4 channels each with 2 IEC power outputs per channel. It has 16 built-in chase programs or can be controlled by 4 channel DMX.

AFX Par Can
ACME CA-M26 DMX Splitter

The Acme CA M26 eliminates the need for two separate units to split and merge DMX signals, this 19", 1U rackable unit does it all as well as boosting the DMX signal. 2 DMX inputs and 6 DMX outputs, each equipped with both 3 pin and 5 pin XLR connectors for compatibility in any DMX setup and 100% electrical isolation between all in/outputs. The booster function analyses the incoming DMX data and re-constructs it before boosting it allowing it to be pushed further down DMX lines without signal problems. Split and merge DMX signals Inputs: 2x DMX Outputs: 6x DMX outputs 3-Pin & 5-pin XLR connectors for DMX DMX Refresh rate: 23ms (44Hz) to 45ms (22Hz) 100% Electrical isolation between all in/outputs Booster function Timing of the DMX outputs selectable from 23ms to 45ms Easy setup via 4 digit LED display 19" Rack mountable Power supply: 240V Dimensions: 482 x 44 x 150mm Weight: 2.9kg

AFX W-DMX 54 LX Controller

Mini wired / wireless dmx controller

You May Also Be Interested In

0.5m LED Wall Fly Bar with Eyebolt

.5m Hanging Bar Note: No Bolts on sides

100m Cat5 Reel

100m Cat5 Reel

10 Meter 32A-63A
10 Meter XLR

10 Meter XLR