4 way digital dimmer
Description
The DP4 4 channel DMX dimmer pack has 4 channels each with 2 IEC power outputs per channel. It has 16 built-in chase programs or can be controlled by 4 channel DMX.
Similar Products
ARRI Studio Softlight 2500W Used ARRI Studio Softlight 2500 in good condition. The ARRI Tungsten Softlights, with their unique optical design and rugged construction, complement the ARRI Spotlight range, particularly for studio use but also on location where large area softlights are required. Light is emitted from virtually the entire frontal rectangular area and, as a result, the units can be positioned close together to provide larger area multiple arrays of softlights as and when required. The reflectors are coated with a specially formulated heat resistant paint which refuses to discolour-originals units are unchanged after many years of use. More importantly, there is no colour temperature shift from these matt finished indirect reflectors-whether old or new. The egg crate, hinged and removable for bulb replacement, is an integral part of the optical design and provides considerable beam-edge control. Each bulb is separately protected by an over-current sensor device. Automatic trip circuit breakers are used on the manual units. Type of Lamphead: FLOOD Power: 2 x 1250 W Lamp Type: P2/12, 1250 W, 230 V, R7s Supply Voltage: 230 V Cable Length: 1m Correlated Color Temperature: 3200 K Lamp Base: R7s Mounting: Spigot 28mm Protection Class: IP 20 Compliance: CE
Mini wired / wireless dmx controller
The Acme CA M26 eliminates the need for two separate units to split and merge DMX signals, this 19", 1U rackable unit does it all as well as boosting the DMX signal. 2 DMX inputs and 6 DMX outputs, each equipped with both 3 pin and 5 pin XLR connectors for compatibility in any DMX setup and 100% electrical isolation between all in/outputs. The booster function analyses the incoming DMX data and re-constructs it before boosting it allowing it to be pushed further down DMX lines without signal problems. Split and merge DMX signals Inputs: 2x DMX Outputs: 6x DMX outputs 3-Pin & 5-pin XLR connectors for DMX DMX Refresh rate: 23ms (44Hz) to 45ms (22Hz) 100% Electrical isolation between all in/outputs Booster function Timing of the DMX outputs selectable from 23ms to 45ms Easy setup via 4 digit LED display 19" Rack mountable Power supply: 240V Dimensions: 482 x 44 x 150mm Weight: 2.9kg
You May Also Be Interested In
10 Meter XLR
.5m Hanging Bar Note: No Bolts on sides
100m Cat5 Reel